※ Suitable for clamping non-magnetic materials such as stainless steel,
aluminum alloys, ferrous and non ferrous metals.
|
※ In the past time vacuum chuck always used pomp to work,
But Vacuum Chuck works throught compressor. |
| |
|
1. Without Pump |
|
|
this product adopts vacuum ejector. Only through compressor can work. |
|
|
even machine had inhaled cooling oil. Cooling water or rubbish etc. Vacuum Chuck also can exclude them. |
|
|
Vacuum Chuck had improved many times and machine to simplify. So less breakdown and easy to maintain. |
| |
|
|
2. For Available All Process Products |
|
|
work well for up layer process. Side process. Grinding. |
|
|
assist metal using. Special shape products process also easy to drill work. |
| |
|
3. at will to adjust size |
|
| |
|
according to size of process products to change assemble and adjust machine. |
| |
|
|
|
|
according to process products size to place station. |
| |
|
4. Place Of Key Trough And Works
Topper |
| |
|
|
vacuum chuck of bottom install key trough. So can get exact parallel angle and vertical angle. |
| |
|
|
vacuum chuck of side install two works stoppers, prevent from momentum. |
|
|
6. Major Assembly Machine End Using
Way |
|
|
|
use semi-automatic fraise prooess. |
|
|
|
use fraise or C fraise to process of cover and side. |
|
|
|
use sculpture machine to make word or precise process. |
|
|
|
group secondary machine to process. |
|
| |
| |
| |
|
7. Crisis
|
|
|
|
vacuum chuck use vacuum press to clamp products and to process. F-=A×P/700 F(kg) A=lnhale area(c㎡) P=(mmHg) |
|
|
|
Vacuum press and size of area. |
|
|
|
air supply should keep steady. |
| |
|
|
Before process products should clean. |
| |
|
|
seal condition and density whether excellent. |
| |
|
|
the clamping area and ventilation. |
|
|
|
warmth, humidity and curved condition of products. |
|
|
|
5. Following Are Suitable For
Clamping Process |
|
|
light metal, hard metal, iron board etc. |
|
|
plastic products, ceramics, ceramics, glass. aluminum steelless. Wood stone materials etc. All un-magnetic products And un-ventilation smooth products. |
|
|
products of small shape, smooth and complicated process. |
|
|
products of outside need full processing but no one can clamp. |
|
|
products of traditional process will cause scar crooked.curved. |
|
|
products of supper thin can't clamp. |
|
|
products of smooth but irregular shape. |
|
|
|
| SPECIFICATION : |
Model |
A |
B |
A+B |
H |
H1 |
Air Consumption |
Maximum Suction |
Weight |
Suction |
|
Wide |
Length |
Total |
mm |
mm |
e/min |
e/min |
|
kg |
VLC-1515 |
150 |
150 |
180 |
60 |
15 |
45 |
31.2 |
9.2 |
135 |
VLC-1530 |
150 |
300 |
330 |
100 |
15 |
45 |
31.2 |
13.7 |
270 |
VLC-3030 |
300 |
300 |
330 |
100 |
15 |
45 |
31.2 |
23.4 |
540 |
VLC-3045 |
300 |
450 |
480 |
100 |
15 |
45 |
31.2 |
37 |
810 |
VLC-3060 |
300 |
600 |
630 |
100 |
15 |
45 |
31.2 |
48.6 |
1080 |
VLC-3075 |
300 |
750 |
780 |
100 |
15 |
113 |
203 |
50.4 |
1350 |
VLC-2020 |
200 |
200 |
230 |
60 |
15 |
45 |
31.2 |
12.1 |
240 |
VLC-2040 |
200 |
400 |
430 |
100 |
15 |
45 |
31.2 |
22.2 |
480 |
VLC-4040 |
400 |
400 |
430 |
100 |
15 |
45 |
31.2 |
42.5 |
960 |
VLC-4060 |
400 |
600 |
630 |
100 |
15 |
113 |
203 |
62.7 |
1440 |
VLC-4080 |
400 |
800 |
830 |
100 |
15 |
113 |
203 |
72.9 |
1920 |
VLC-40100 |
400 |
1000 |
1030 |
100 |
15 |
113 |
203 |
103.1 |
2400 |
VLC-2525 |
250 |
250 |
280 |
100 |
15 |
45 |
31.2 |
16.4 |
375 |
VLC-2550 |
250 |
500 |
530 |
100 |
15 |
45 |
31.2 |
30.6 |
750 |
VLC-5050 |
500 |
500 |
530 |
100 |
15 |
113 |
203 |
59.2 |
1500 |
VLC-5075 |
500 |
750 |
780 |
100 |
15 |
113 |
203 |
87.8 |
2250 |
VLC-50100 |
500 |
1000 |
1030 |
100 |
15 |
113 |
203 |
116.4 |
3000 |
VLC-50125 |
500 |
1250 |
1280 |
100 |
15 |
113 |
203 |
145.0 |
3750 |
VLC-6060 |
600 |
600 |
630 |
100 |
15 |
113 |
203 |
78.6 |
2160 |
VLC-6090 |
600 |
900 |
930 |
100 |
15 |
113 |
203 |
116.4 |
3240 |
|
| |
|
|
| |
|
| |
• Parallel angle : ±0.01
• Material : S55C
• Product : dye black up/down grinding
• Character : airblow circuit to conceal
• Plate : hot handling
• Auxiliary parts : silicone 4 ∮ 2m |
|
|
|
|
| |
◎ If the work piece is of a sticky make-up or particularly soft, chips may accumulate at the cutter. It is suggested that a steady supply of coolant fluid is supplied at the cutter. |
|
◎ Work piece must be larger than the diameter of the nozzle to secure properly. |
|
|
|
